New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Quantitative Structure—Retention Relationship Modeling of the Retention Behavior of Selected Antipsychotic Drugs in Normal-Phase Thin-Layer Chromatography

JPC – Journal of Planar Chromatography – Modern TLC -     

Novel Approach to Two-Component Analysis Based on the Generalized Calibration Strategy

The generalized calibration strategy (GCS), developed and previously applied to chemical analysis, has been adapted to two-component (2C) analysis. According to the 2C-GCS procedure, a set of 10 calibration solutions containing a sample and standards of two analytes in well-defined composition was diluted. The measurements performed at a given dilution stage allow the concentration of both analytes in a sample to be evaluated with six apparent concentrations calculated with various mathematical approaches. As a result, the method allows the detection, examination, and elimination of nonlinear and interference effects with multiplicative and additive characteristics. To perform 2C-GCS automatically and effectively, a dedicated flow sequential injection system was designed to be fully controlled by a computer. Caffeine and paracetamol were determined in synthetic and pharmaceutical samples using this calibration approach. The analytes were determined with good precision and accuracy with low consumption of sample and standard solutions. On the basis of this experimental model, the influence of effects and tendencies in the examined analytical system was detected and evaluated.     

A blue luminescent binuclear cadmium-orotate coordination polymer: synthesis,crystal structure,and thermogravimetric analysis

Assembly of orotic acid (H₃Or, 1,2,3,6-tetrahydro-2,6-dioxo-4-pyrimidinecarboxylic) and Cd(NO₃)·6H₂O yielded a coordination polymer, [(Cd(Hor)·2.5H₂O)₂]_n (1), which has been characterized by X-ray single-crystal diffraction, TGA, and ?uorescence spectra. Single-crystal X-ray structural analyses reveal that 1 is a hydrogen-bonded binuclear Cd-orotate coordination polymer in which both Cd²⁺ ions have different coordination environments with identical distorted octahedral geometry. Crystal data for 1: monoclinic, space group P2₁/n, a = 7.0209(10) Å, b = 13.974(2) Å, c = 17.541(3) Å, β = 98.842(2)°, V = 1700.5(4) Å, Z = 4, R1 = 0.0269, wR2 = 0.0612, θ_max = 25.960. The emission spectrum of the Cd-complex recorded with 265 nm excitation wavelength reveals the complex has strong blue luminescence with the peak maximum 420 nm (2.95 eV) as a result of the n–π* and π–π* transitions on the H₃Or ligand.     

Silver nanoparticles formed in bio- and chemical syntheses with biosurfactant as the stabilizing agent

In this work, the comparison of the physical properties of silver nanoparticles (AgNPs) obtained via the reduction of silver nitrate (AgNO₃) in biological and chemical (model) syntheses supplemented with the biosurfactant surfactin is described. In the studies, two strains of Bacillus subtilis (denoted T’1 and I’1a) were used. The biological synthesis of AgNPs was performed using supernatants obtained from cultures of bacteria growing on brewery effluents, molasses, and Luria–Bretani (LB) medium. In model experiments, ascorbic acid served as the reductant; surfactin acted as the stabilizing agent. The surfactin concentrations were adjusted to 5 and 30?mg/L, which corresponded to minimum and maximum surfactin concentrations as measured in the supernatants obtained from the B. subtilis cultures. The chemical synthesis was carried out at acidic as well as alkaline pH. Dynamic light scattering (DLS) revealed that in model and biological samples, single AgNPs were accompanied by aggregated structures. Transmission electron microscopy showed that the contribution of the aggregates in bacterial supernatants and in chemical synthesis is negligible under acidic conditions. However, in the alkaline environment, this contribution predominates. In the model experiments, smaller nanoparticles were formed with higher concentrations of surfactant. The presence of surfactin significantly increased the stability of AgNPs in both bio- and chemical syntheses.     

Analysis of flammability and smoke emission of rigid polyurethane foams modified with nanoparticles and halogen-free fire retardants

Using one-step method, rigid polyurethane foams were made, modified with developed fire retardant systems containing halogen-free flame retardants and nanofillers in the form of multi-walled carbon nanotubes or nanoscale titanium dioxide. The materials were subjected to a test using a cone calorimeter and smoke-generating chamber, and selected samples were further analyzed via thermogravimetry and oxygen index. Moreover, the products of thermal degradation of selected samples were identified using gas chromatography with mass spectrometer. Conducted flammability tests confirmed the presence of a synergistic effect between the used nanofillers and halogen-free flame retardants. It has been observed that the carbonized layer, the formation of which favored the presence of nanoadditives, inhibits the combustion process. Furthermore, nanofillers influenced favorably reduction in the amount and the number of occurring products of thermal degradation.     

Effect of composition and drying method on glass transition temperature,water sorption characteristics and surface morphology of newly designed β-lactoglobulin/retinyl palmitate/disaccharides systems

Epoxy-based nanocomposites containing different concentrations (0–3%) of surface-modified graphene nanosheets (GNS) with 3-aminopropyltriethoxysilane were prepared and their thermal and mechanical properties including dynamic mechanical analysis, tensile strength, hardness, and abrasion tests were evaluated in order to have a database for thermo-mechanical properties of epoxy nanocomposites. The main aim of this study was to understand the optimum percentage of GNS which would perform the best reinforcing influence on mechanical and physical performance of an epoxy nanocomposite. The results explain how applying the analysis of variance (ANOVA) method as a useful tool in optimization of GNS concentration in preparation of high-performance epoxy-based nanocomposites.     

How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.     

Characteristics of Dietary Fatty Acids Isolated from Historic Dental Calculus of the 17th- and 18th-Century Inhabitants of the Subcarpathian Region (Poland)

Dental calculus analysis can be a valuable source of archaeological knowledge, since it preserves not only microbial and host biomolecules but also dietary and environmental debris, as well as metabolic products likely originating from dietary and craft activities. Here we described GC-MS analysis of a set of historic dental calculus samples from the front teeth of the mandibles of seven individuals found in 17th- and 18th-century graves in the city of Rzeszow, located in South-eastern Poland. We have found that only saturated fatty acids, which are characteristic for fats of animal origin, were present in the tested samples. Our preliminary results indicate that the diet of modern-period inhabitants of Rzeszow was rich in animal products, such as meat and dairy products.     

Searching for Potential Markers of Glomerulopathy in Urine by HS-SPME-GC×GC TOFMS

Volatile organic compounds (VOCs) exiting in urine are potential biomarkers of chronic kidney diseases. Headspace solid phase microextraction (HS-SPME) was applied for extraction VOCs over the urine samples. Volatile metabolites were separated and identified by means of two-dimensional gas chromatography and time of flight mass spectrometry (GC × GC TOF MS). Patients with glomerular diseases (n = 27) and healthy controls (n = 20) were recruited in the study. Different VOCs profiles were obtained from patients and control. Developed methodology offers the opportunity to examine the metabolic profile associated with glomerulopathy. Four compounds found in elevated amounts in the patients group, i.e., methyl hexadecanoate; 9-hexadecen-1-ol; 6,10-dimethyl-5,9-undecadien-2-one and 2-pentanone were proposed as markers of glomerular diseases.